Name: Tenth International Workshop on Spallation Materials Technology
Start: 2010-10-18T08:00:00+08:00
End: 2010-10-22T18:00:00+08:00
Location: Beijing,china

Monday, 18 October 2010
08:15
08:15 - 10:00
Contributions

08:15 Opening address - Yong Dai (Paul Scherrer Institut)

08:30 Operation experiences of high power spallation targets - John Haines (Oak Ridge National Laboratory / Spallation Neutron Source)

09:00 European materials R&D activities for Gen-IV and ADS - Concetta Fazio (KIT)

09:30 Developments in the design of the spallation target for MYRRHA - Paul Schuurmans (SCK•CEN)
10:00 break
break
10:00 - 10:30
10:30
10:30 - 12:00
Contributions

10:30 Status of the China Spallation Neutron Source(CSNS) - YUANBO CHEN

11:00 The MEGAPIE target on the way to PIE - Werner Wagner (Paul Scherrer Institut, Switzerland)

11:30 SINQ target irradiation program, STIP-IC to -VI - Yong Dai (Paul Scherrer Institut)
12:00 Lunch
Lunch
12:00 - 13:30
13:30
13:30 - 15:20
Contributions

13:30 Behaviors of structural materials under high energy proton and spallation neutron mixed spectrum irradiation, an overview of STIP Results - Yong Dai (Paul Scherrer Institut)

13:55 Materials development and testing for high dose materials applications - S.A. Maloy

14:20 Mechanical properties of JPCA and Alloy800H irradiated up to 19 dpa at SINQ target - Shigeru Saito (JAEA)

14:40 Impact properties of 9Cr tempered martensitic steels and MA957 ODS alloy irradiated in a spallation environment up to 24 dpa - Jean HENRY (CEA)

15:00 The effect of displacement damage and helium bubble on Eurofer97 steel tensile property - Zhenfeng Tong (China institute of atomic energy)
15:20 break
break
15:20 - 15:50
15:50
15:50 - 17:50
Contributions

15:50 Positron annihilation lifetime measurements of austenitic stainless steels irradiated in the SINQ target irradiation program - Koichi Sato (Research Reactor Institute, Kyoto University)

16:10 Effects of alloying elements on thermal desorption of helium in Ni alloys - Qiu Xu (Research Reactor Institute, Kyoto University)

16:30 SANS and TEM investigation of phase precipitation in HT-9 at high neutron irradiation dose levels - Joris Van den Bosch (LANL)

16:50 Micro-compression testing on irradiated model and structural alloys - HOSEMANN P.

17:10 Hardening effect of helium bubbles in ferritic / martensitic steels and austenitic steel SS316L - Lei Peng (Institute of Plasma Physics, CAS)

17:30 First principle studies of intrinsic defects in hexagonal tungsten carbide - Changsong Liu (Insitute of Solid State Physics, Chinese Academy of Sciences)
Tuesday, 19 October 2010
08:00
08:00 - 09:25
Contributions

08:00 Status of R&D on mitigating the effects of pressure waves for the spallation neutron source mercury target - Bernie Riemer (Spallation Neutron Source / ORNL)

08:25 Initial observations of cavitation-induced erosion of liquid metal spallation target vessels at the Spallation Neutron Source - David McClintock (Oak Ridge National Laboratory)

08:45 Two-phase flow model for energetic proton beam induced pressure waves in mercury target systems in the planned European Spallation Source - Imre Ferenc Barna (KFKI Atomic Energy Research Institut(AEKI) of the Hungarian Academy of Sciences)

09:05 Post-irradiation analysis of the tantalum container of an ISOLDE LBE target - Etam Noah (ESS)
09:25 break
break
09:25 - 09:55
09:55
09:55 - 12:00
Contributions

09:55 Pulsed E-beams to improve Corrosion Barriers for Lead Alloy Cooled Reactors: overview and dedicated Mechanical Tests - Alfons Weisenburger (Karlsruhe Institute of Technology KIT)

10:20 FeCrAlY and TiN coatings on T91 steel after irradiation with 72 MeV protons in flowing LBE - Yong Dai (Paul Scherrer Institut)

10:40 Influence of oxide layer strength on LME susceptibility of Si enriched steels - Joris Van den Bosch (LANL)

11:00 Embrittlement effects of LBE on ferritic/martensitic steels after irradiation in SINQ targets - Bin Long (China Institute of Atomic Energy)

11:20 Fatigue crack propagation accelerated by mercury immersion - Takashi Naoe (Japan Atomic Energy Agency)

11:40 Effect of cold working on the corrosion resistance of JPCA steel in flowing Pb-Bi at 450°C - Abu Khalid Rivai (JAEA-Japan Atomic Energy Agency)
12:00 Lunch
Lunch
12:00 - 13:30
13:30
13:30 - 15:35
Contributions

13:30 Corrosion kinetics of steel T91 in flowing oxygen-containing lead-bismuth eutectic at 450° and 550°C - Juergen Konys (Karlsruhe Institute of Technology)

13:55 Corrosion-erosion test of SS316L grain boundary engineering material (GBEM) in lead bismuth flowing loop - Shigeru Saito (JAEA)

14:15 Nano-structure investigation of HCM12A oxide layer - Kenji Kikuchi (Ibaraki University & JAEA)

14:35 Breakthrough technology for measuring the electrical impedance of protective steel oxide scales in LBE at temperatures up to 600°C - Alan Bolind (Ibaraki University)

14:55 Impedance spectroscopy and microstructural characterization of the corrosion behavior of FeCrAl steel in lead-bismuth eutectic - Xiang Chen (University of Illinois at Urbana-Champaign)

15:15 Electrically rectifying properties of protective oxide layers on steels in a liquid lead-bismuth-eutectic alloy environment - Alan Bolind (Ibaraki University)
15:35 break
break
15:35 - 16:00
16:00
16:00 - 17:45
Contributions

16:00 Fabrication of a tantalum-clad tungsten target for LANSCE - Andrew Nelson (Los Alamos National Laboratory)

16:25 Optimization of the thermal characteristics of an oxide high power target for radioactive ion beam production - Etam Noah (ESS)

16:45 A reevaluation of radiation damage cross sections - Wei Lu (Oak Ridge National Laboratory)

17:05 The expected radiation damage of CSNS target - Wen Yin (Institute of Physics, Chinese Academy of Science)

17:25 Radiochemical aspects of liquid metal spallation targets - Jörg Neuhausen (Paul Scherrer Institut)
Wednesday, 20 October 2010
08:00
08:00 - 09:30
Contributions

08:00 Overview of material R&D activities for advanced nuclear energy systems - yican wu (中科院等离子体物理研究所)

08:30 R&D status on cavitation damage in JSNS of J-PARC/MLF - Masatoshi Futakawa (Japan Atomic Energy Agency)

09:00 Recent developments in neutronics codes and cross section databases relevant to estimating radiation damage in materials for spallation source environments - Eric Pitcher (Los Alamos National Laboratory)
09:30 break
break
09:30 - 10:00
10:00
10:00 - 11:30
Contributions

10:00 Advanced experimental techniques for assessing microstructural and mechanical changes induced by irradiation - Kenji Kikuchi (Ibaraki University & JAEA) S.A. Maloy
Thursday, 21 October 2010
08:30
08:30 - 10:20
Contributions

08:30 Development of advanced materials for spallation neutron sources and radiation damage simulation code based on multi-scale model - Masayoshi Kawai (High Energy Accelerator Research Organization (KEK))

08:55 Current status of toughness enhanced W-1.1%TiC development - Hiroaki Kurishita (Tohoku University)

09:20 The progress on R&D of CSNS target station materials - Shaohong Wei (Institute of high energy physics,CAS)

09:40 The study on the microwave sintering of tungsten at relatively low temperature - Qian Feng Fang (Institute of Solid State Physics, Chinese Academy of Sciences)

10:00 The new progress of fabrication of oxide dispersion strengthened Fine Grained Tungsten - Zhangjian Zhou (University of Science and Technology Beijing)
10:20 break
break
10:20 - 10:50
10:50
10:50 - 14:30
Contributions

10:50 Development and analysis of diffusion bonding techniques for LBE-cooled spallation targets - Andrew Nelson (Los Alamos National Laboratory)

11:10 Development status of Au-In-Cd alloy as a low activation decoupler material for JSNS - Motoki Ooi (JAEA)

11:30 Development of Invar joint for hydrogen transfer line in JSNS - Teshigawara M.

13:30 Post-irradiation analysis of refractory metal foils irradiated at high temperature for EURISOL 100 kW targets - Etam Noah (ESS)

13:50 Microwave sintering of W/Cu functional graded materials - Qian Feng Fang (Institute of Solid State Physics, Chinese Academy of Sciences)

14:10 Theoretical simulation of radiation effects on materials with energetic particles - Yonggang li (Research Laboratory for Computational Materials Sciences, Institute of Solid State Physics, Chinese Academy of Sciences)
14:30 break
break
14:30 - 15:00
15:00
15:00 - 16:40
Contributions

15:00 Materials R&D needs for the ESS target station - Etam Noah (ESS)

15:20 Structural characterization of Lead Gold Eutectic: an x-ray thermodiffractometry study - Maria Luisa Medarde Barragan (Paul Scherrer Institut, Switzerland)

15:40 Preliminary tests on the compatibility of LGE with T91 and SS316LN steels - Yong Dai (Paul Scherrer Institut)

16:00 Experience with a first LGE loop and proposal for further investigations in flowing LGE - Knud Thomsen (Paul Scherrer Institut)

16:20 MHD technologies in spallation target related investigations - Ernests Platacis (Institute of Physics of Uninversity of Latvia)
Friday, 22 October 2010

08:30

08:30 - 10:00

10:00 break
break
10:00 - 10:30

10:30

10:30 - 11:00