29 October 2023 to 4 November 2023
Asia/Shanghai timezone

Session

Poster

Not scheduled

Presentation materials

There are no materials yet.

  1. Zhanwen Ma (PSI)
    Poster

    As a novel approach to neutron research facilities, High-Current Accelerator-driven Neutron Sources (HiCANS) are currently being developed for use as future national neutron sources. One of these facilities is the High Brilliance neutron Source (HBS), designed at the Jülich Center of Neutron Science (JCNS) in Germany. HBS uses a pulsed proton beam of 70 MeV energy and 100 kW time-averaged...

    Go to contribution page
  2. Mr Joerg Welte (Paul Scherrer Institut)
    Poster

    In 2019, we have introduced a new system that improves the safe application of the proton beam onto the SINQ target. The basic idea is that we detect the beam position directly in the target with a two-dimensional network of temperature sensors. The temperature measurement is done with type-K thermocouples directly in our Zircaloy target rods. This system is called TBPS (Target Beam...

    Go to contribution page
  3. Junyang Chen (Forschungszentrum Jülich GmbH)
    Poster

    The High Brilliance Neutron Source (HBS) project is developing a high-current accelerator-driven neutron source (HiCANS) to maintain a healthy neutron landscape in Europe. Despite the lower primary neutron yield of the nuclear reactions compared to reactor or spallation neutron sources, HiCANS achieve a competitive neutron brightness by a compact moderator and reflector design, which makes a...

    Go to contribution page
  4. Dr Masami Nirei (J-PARC Center, Japan Atomic Energy Agency)
    Poster

    AMATERAS[1] is the disk-chopper type neutron spectrometer for measuring inelastic and quasielastic neutron scattering in the energy range from cold to sub-thermal neutron regions with high efficiency and fine resolution. In 2021, AMATERAS extended the neutron guide to focus neutrons and increase intensity at the sample position. In the opportunity, we evaluated neutron flux at the sample...

    Go to contribution page
  5. YU CHAOJU
    Poster

    Cadmium and boron carbide(B4C) are two very excellent neutron decoupling materials, due to the problem of irradiation swelling(increases helium gas), B4C has not been used as a decoupling material in high-power spallation neutron sources in the world, and cadmium or cadmium composite materials are still the mainstream neutron decoupling materials that have been applied practically. But in...

    Go to contribution page
  6. Mr Yuxuan Lai (Tsinghua University)
    Poster

    The one-source-one-detector bimodal imaging system shows incredible promise in in-situ industrial applications, such as residual core material detection for turbine blade, lithium ore concentration analysis and study of water transport in concrete. The target station design will dramatically affect the spectrum and flux for both neutrons and photons, which in turn influence the material...

    Go to contribution page
  7. Mr Peng Hu (Institute of High Energy Physics, Chinese Academy of Sciences, Beijing, China; Spallation Neutron Source Science Center, Dongguan 523803, China)
    Poster

    Diffusion controls almost microscopic processes such as element partition, microstructure evolution, structural order, and dislocation climb, which is closely related to the creep strength of Ni-based superalloys. In this study, the effects of Re, Mo and Ta on vacancy-mediated diffusion and structural order of γ'-Ni3Al have been systematically evaluated via incorporating first-principles and...

    Go to contribution page
No scheduled contributions