CEPC Calorimeter Weekly Meeting on TDR
→
Asia/Shanghai
Jianbei Liu
(University of Science and Technology of China),
Yong Liu
(Institute of High Energy Physics)
Description
Zoom connection information
-
Meeting ID: 666 4623 8623
-
Passcode: cepc-tdr
-
-
09:00
→
09:05
Introduction and news 5mSpeakers: Jianbei Liu (University of Science and Technology of China), Dr Yong Liu (Institute of High Energy Physics)
-
09:05
→
09:25
Electronics, mechanics, physics and software: discussions on CEPC-TDRConveners: Jinfan Chang (高能所), Manqi Ruan (IHEP), Shaojing 侯少静 (高能所), Sheng-Sen Sun (Institute of High Energy Physics)
-
09:05
Calorimeter electronics 5mSpeaker: Jinfan Chang (高能所)
-
09:10
Calorimeter layout and mechanics 5mSpeakers: Quan JI, Shaojing 侯少静 (高能所), Sheng-Sen Sun (Institute of High Energy Physics)
-
09:15
Calorimeter software 5mSpeakers: Fangyi Guo, Sheng-Sen Sun (Institute of High Energy Physics)
-
09:20
Physics performance related to calorimeters 5mSpeaker: Manqi Ruan (IHEP)
-
09:05
-
09:25
→
09:55
CEPC calorimeter options: down select for CEPC-TDRConvener: Jianbei Liu (University of Science and Technology of China)
-
09:25
Plastic scintillator ECAL and HCAL 5mSpeaker: Yunlong Zhang (University of Science and Technology of China)
-
09:30
Silicon ECAL and glass-RPC HCAL 5mSpeaker: Haijun Yang (Shanghai Jiao Tong University)
-
09:35
Highly granular crystal/glass ECAL 5mSpeaker: Dr Yong Liu (Institute of High Energy Physics)
-
09:40
Stereo crystal ECAL 5mSpeaker: Huaqiao ZHANG (IHEP)
-
09:45
Glass HCAL 5mSpeakers: Peng Hu (IHEP), Sen Qian (高能所)
-
09:50
Wrap-up 5mSpeaker: Jianbei Liu (University of Science and Technology of China)
-
09:25
-
09:50
→
09:53
AOB 3mSpeaker: All
-
09:53
→
09:55
Minutes 2mSpeakers: Fangyi Guo, Dr Yong Liu (Institute of High Energy Physics)
电子学(Wei Wei):
- 散热:由探测器提出需求,交由机械组进行仿真计算
- 桶部-端盖间隙:机械组提出6cm,对电子学来说满足要求。
- 端盖计数率显著比桶部高,需要通过模拟确认需求。
端盖量能器设计:
- 有初步设计图纸。
- 软件几何的工作:ECAL端盖几何有安排,HCAL暂时人力短缺。
- 端盖HCAL:2种设计:高颗粒度/R向分层。可以根据Barbar等物理过程进行初步评估和优化(Hengne)。
机械(Shaojing):
- ECAL barrel重量分配在HCAL上,可以把ECAL机械的栅格结构厚度从1cm减小到5mm。
- 加入2mm打孔结构,用于晶体固定,留固定窗口供电子学光电器件。
- 按16边形*2,矩形+梯形结构进行的设计。(Comment:更新到正反梯形方案)
Review of TDR meeting (Yong): in slides.
- 机械,软件,造价估计根据新尺寸进行调整。
-
09:00
→
09:05