Name: Workshop on Accelerator R&D for Ultimate Storage Rings
Start: 2012-10-30T08:00:00+08:00
End: 2012-11-01T18:00:00+08:00
Location: No location set

Workshop on Accelerator R&D for Ultimate Storage Rings

from Tuesday, October 30, 2012 (8:00 AM) to Thursday, November 1, 2012 (6:00 PM)

Monday, October 29, 2012
Tuesday, October 30, 2012
8:30 AM
8:30 AM - 9:35 AM
Contributions

8:30 AM Welcome - Yifang Wang (Institute of High Energy Physics, CAS)

8:40 AM Workshop charge - Qing Qin (Institute of High Energy Physics, CAS)

8:50 AM Scientific cases for USR - Hong Ding (Institute of Physics, CAS)

9:05 AM Highlights of science of USR - Yuhui Dong (Institute of High Energy Physics, CAS)

9:20 AM Overview of USR design and performance requirements - Robert Hettel (SLAC NAL)
9:35 AM
9:35 AM - 10:35 AM
Contributions

9:35 AM MAX-IV project and MBA with higher multipoles - Simon Leemann (MAX IV Laboratory)

9:55 AM Latest development of ESRF and future plan - Pantaleo Raimondi (ESRF)

10:15 AM Lattice design for Spring-8 II - Yoshito Shimosaki (JASRI / SPring-8)
10:35 AM Group photo and Coffee break
Group photo and Coffee break
10:35 AM - 10:50 AM
10:50 AM
10:50 AM - 12:15 PM
Contributions

10:50 AM USR upgrade for ALS - Christoph Steier (Lawrence Berkeley National Laboratory)

11:07 AM Study of lower emittance lattice at SOLEIL - Amor NADJI (SOLEIL)

11:24 AM BAPS lattice design - Gang Xu (Institute of High Energy Physics, CAS)

11:44 AM Discussion
12:15 PM Lunch
Lunch
12:15 PM - 1:30 PM
1:30 PM
1:30 PM - 3:30 PM
Contributions

1:30 PM Collective effects in USRs - Karl Bane (SLAC National Accelerator Laboratory)

1:50 PM Single and multiple Touschek scattering in low emittance rings - Manuela Boscolo (INFN)

2:10 PM BAPS CSR, impedance and IBS - Na Wang (Institute of High Energy Physics, CAS) Saike Tian (Institute of High Energy Physics, CAS)

2:30 PM Propagation of ultra-short bunches in USRs and potential lasing - Robert Hettel (SLAC NAL)

2:50 PM Optimal RF frequency - Mikael Eriksson (MAX-lab)

3:05 PM Discussion
3:30 PM Coffee break
Coffee break
3:30 PM - 3:45 PM
3:45 PM
3:45 PM - 6:20 PM
Contributions

3:45 PM Some engineering challenges for a USR machine - Lin ZHANG (ESRF)

4:05 PM Anticipated limits on machine stability and consequences on machine and beamline designs - Jean-Claude DENARD (Synchrotron SOLEIL)

4:25 PM MAX-IV magnet design - Martin Johansson (MAX IV Laboratory)

4:45 PM High Gradient Magnet Design - Kouichi Soutome (JASRI/SPring-8)

5:00 PM Design and fabrication of NSLS-II sextupole - Wen Kang (Institute of High Energy Physics, CAS)

5:15 PM Design for high precision small aperture magnets for BAPS - Fusan Chen (Institute of High Energy Physics, CAS)

5:30 PM Discussion
6:30 PM Dinner
Dinner
6:30 PM - 7:30 PM
Wednesday, October 31, 2012
8:00 AM
8:00 AM - 10:15 AM
Contributions

8:00 AM Compact low emittance lattice including superbends - Lin Liu (Brazilian Synchrotron Light Laboratory)

8:20 AM PEP-X design - Michael Borland (Argonne National Laboratory)

8:40 AM Tevatron USR and other topics of USR - Michael Borland (Argonne National Laboratory)

9:00 AM Overview of optics correction at Diamond and plan for DLS-II - Riccardo Bartolini (Diamond and JAI)

9:20 AM Round beam experience at BINP - E. Levichev (INP)

9:37 AM Discussion
10:15 AM Coffee break
Coffee break
10:15 AM - 10:30 AM
10:30 AM
10:30 AM - 12:00 PM
Contributions

10:30 AM Optimization of dynamic aperture for the ESRF upgrade - Andrea Franchi (ESRF)

10:50 AM Coupling correction at SLS, minimum vertical emittance - Leonid Rivkin (Paul Scherrer Institut)

11:10 AM 2-frequency RF system for short bunches at SPring-8 - takahiro fujita (SPring-8)

11:25 AM Discussion
12:00 PM Lunch
Lunch
12:00 PM - 1:30 PM
1:30 PM
1:30 PM - 2:30 PM
Contributions

1:30 PM Top – up injection - Leonid Rivkin (Paul Scherrer Institut)

1:50 PM Injection into low-lifetime USRs - Robert Hettel (SLAC NAL)

2:10 PM Pulsed sextupole injection for MAX-IV - Simon Leemann (MAX IV Laboratory)
2:30 PM
2:30 PM - 4:00 PM
Contributions

2:30 PM Pulsed sextupole injection for BAPS - Yi Jiao (Institute of High Energy Physics, CAS)

2:50 PM Injection scheme for the SPring-8 upgrade - Kouichi Soutome (JASRI/SPring-8)

3:10 PM On-axis swap-out injection - Michael Borland (Argonne National Laboratory)

3:30 PM Discussion
4:00 PM Coffee break
Coffee break
4:00 PM - 4:15 PM
4:15 PM
4:15 PM - 6:00 PM
Contributions

4:15 PM MAX-IV vacuum chamber design - Eshraq Al-Dmour (Vacuum group coordinator)

4:35 PM Single non-linear injection kicker magnet - Olaf Dressler (Helmholtz-Zentrum Berlin)

4:55 PM Fast pulsed power supply for ILC damping ring kicker - Jinhui Chen (Institute of High Energy Physics, CAS)

5:15 PM Ground vibration for BAPS - Daheng Ji (Institute of High Energy Physics, CAS)

5:30 PM Discussion
6:30 PM Banquet
Banquet
6:30 PM - 8:00 PM
Thursday, November 1, 2012
8:00 AM
8:00 AM - 9:35 AM
Contributions

8:00 AM SOLEIL orbit feedback systems and photon BPMs - Jean-Claude DENARD (Synchrotron SOLEIL)

8:25 AM Multi-Bunch Feedback System in USR - takahiro fujita (SPring-8)

8:45 AM Feedback system for USRs - Christoph Steier (Lawrence Berkeley National Laboratory)

9:05 AM Discussion
9:35 AM
9:35 AM - 12:30 PM
Contributions

9:35 AM IDs for the ESRF upgrade - Joel CHAVANNE (European Synchrotron Radiation Facility)

9:55 AM Superconducting IDs at BINP - Konstantin Zolotarev

10:30 AM IDs for Shanghai Synchrotron Radiation Facility - Qiaogen Zhou (Shanghai Institute of Applied Physics, CAS)

10:50 AM PETRA-III damping wiggler experience - Alexander Kling (DESY Hamburg)

11:10 AM Undulator technology for USR - Mark Jaski (Argonne National Laboratory)

11:30 AM Cryogenic permanent magnet and superconducting small period undulators - Johannes Bahrdt (Helmholtz-Zentrum Berlin)

11:50 AM Discussion
12:30 PM Lunch
Lunch
12:30 PM - 1:30 PM
1:30 PM
1:30 PM - 5:30 PM
Contributions

1:30 PM Report writing

2:25 PM Summary