Workshop on Accelerator R&D for Ultimate Storage Rings

Oct 30, 2012, 8:00 AM → Nov 1, 2012, 6:00 PM Asia/Shanghai

Qing Qin (IHEP) , Robert Hettel (SLAC)

Storage ring-based light sources will continue to play a vital role in X-ray science into the future since they offer beam properties that are complementary to FEL sources. Ring-based sources provide highly stable photon beams having low peak brightness with high average brightness and pulse repetition rate, photons that do not over-excite or damage samples the way those from FELs do, and they serve a large number of diverse users simultaneously. There are now emerging scientific applications and experimental methods that would greatly benefit from ring-based sources having much higher brightness and transverse coherence than present or near-future storage ring facilities – storage rings having electron emittance < ~100 pm-rad in both transverse planes – on the scale of the diffraction limited emittance for hard X-rays. Several institutions world-wide are now including the prospect of building diffraction-limited “ultimate” storage rings (USRs) in their 10-year development plans. These machines push the state of the art for storage ring accelerator and photon beam line design, presenting many significant challenges that must be addressed with R&D.

Tuesday, October 30

8:30 AM → 9:35 AM Welcome and Introduction Session

Convener: Xiaoming Jiang (Institute of High Energy Physics, CAS)

8:30 AM Welcome

Speaker: Prof. Yifang Wang (Institute of High Energy Physics, CAS)

Slides IHEP-introduction-2012-10.ppt

8:40 AM Workshop charge

Speaker: Dr Qing Qin (Institute of High Energy Physics, CAS)

Slides Workshop_Charge.pptx

8:50 AM Scientific cases for USR

Speaker: Prof. Hong Ding (Institute of Physics, CAS)

9:05 AM Highlights of science of USR

Speaker: Prof. Yuhui Dong (Institute of High Energy Physics, CAS)

Slides Highlights_of_science_of_USR.ppt

9:20 AM Overview of USR design and performance requirements

Speaker: Robert Hettel (SLAC NAL)

Slides USR_design_and_performance_requirements.pptx

9:35 AM → 10:35 AM Session 1: Lattice Design (part 1)

Convener: Gang Xu (Institute of High Energy Physics, CAS)

9:35 AM MAX-IV project and MBA with higher multipoles

Speaker: Dr Simon Leemann (MAX IV Laboratory)

Slides Leemann_Lattice.pdf

9:55 AM Latest development of ESRF and future plan

Speaker: Dr Pantaleo Raimondi (ESRF)

Slides Raimondi_Beijing.pptx

10:15 AM Lattice design for Spring-8 II

Speaker: Dr Yoshito Shimosaki (JASRI / SPring-8)

Slides USR_WS_Shimosaki_121026.pdf

10:35 AM → 10:50 AM Group photo and Coffee break

10:50 AM → 12:15 PM Session 2: Lattice Design (part 2)

Convener: Haruo Ohkuma (Spring-8)

10:50 AM USR upgrade for ALS

Speaker: Dr Christoph Steier (Lawrence Berkeley National Laboratory)

Slides csteier_usr2012_als_usr.pdf

11:07 AM Study of lower emittance lattice at SOLEIL

Speaker: Dr Amor NADJI (SOLEIL)

Slides USR-Nov2012-China-Amor_NADJI.pdf

11:24 AM BAPS lattice design

Speaker: Gang Xu (Institute of High Energy Physics, CAS)

Slides BAPS_Lattice_Design.pptx

11:44 AM Discussion

12:15 PM → 1:30 PM Lunch

1:30 PM → 3:30 PM Session 3: Accelerator Physics (part 1)

Convener: Pantaleo Raimondi

1:30 PM Collective effects in USRs

Speaker: Karl Bane (SLAC National Accelerator Laboratory)

Slides USR_coll_effects_KBaneb.pptx

1:50 PM Single and multiple Touschek scattering in low emittance rings

Speaker: Dr Manuela Boscolo (INFN)

Slides mboscolo_touschek_usr.pdf

2:10 PM BAPS CSR, impedance and IBS

Speakers: Ms Na Wang (Institute of High Energy Physics, CAS) , Mr Saike Tian (Institute of High Energy Physics, CAS)

Slides ibs.ppt Impedance.ppt

2:30 PM Propagation of ultra-short bunches in USRs and potential lasing

Speaker: Robert Hettel (SLAC NAL)

Slides PEP-X_short_bunches.pptx

2:50 PM Optimal RF frequency

Speaker: Prof. Mikael Eriksson (MAX-lab)

Slides USR_RF3.pdf

3:05 PM Discussion

3:30 PM → 3:45 PM Coffee break

3:45 PM → 6:20 PM Session 4: Accelerator Engineering (part 1)

Convener: Prof. Mikael Eriksson (MAX-lab)

3:45 PM Some engineering challenges for a USR machine

Speaker: Dr Lin ZHANG (ESRF)

Slides USR2012_LZhang.pptx

4:05 PM Anticipated limits on machine stability and consequences on machine and beamline designs

Speaker: Mr Jean-Claude DENARD (Synchrotron SOLEIL)

Slides USRstability_Denard_Oct30_16h05.pptx

4:25 PM MAX-IV magnet design

Speaker: Mr Martin Johansson (MAX IV Laboratory)

Slides USR2012_-_MAX_IV_magnet_design,_MJ121029.pdf

4:45 PM High Gradient Magnet Design

Speaker: Dr Kouichi Soutome (JASRI/SPring-8)

Slides slides

5:00 PM Design and fabrication of NSLS-II sextupole

Speaker: Dr Wen Kang (Institute of High Energy Physics, CAS)

Slides The_high_precision_magnet_production_for_NSLSII_at_IHEP.pptx

5:15 PM Design for high precision small aperture magnets for BAPS

Speaker: Dr Fusan Chen (Institute of High Energy Physics, CAS)

Slides Preliminary_Design_of_High_Precision_Small_Aperture_Magnets_for_BAPS.ppt

5:30 PM Discussion

6:30 PM → 7:30 PM Dinner

Wednesday, October 31

8:00 AM → 10:15 AM Session 1: Lattice Design (part 3)

Convener: Jiuqing Wang (Institute of High Energy Physics, CAS)

8:00 AM Compact low emittance lattice including superbends

Speaker: Lin Liu (Brazilian Synchrotron Light Laboratory)

Slides USR-LiuLin.pptx

8:20 AM PEP-X design

Speaker: Dr Michael Borland (Argonne National Laboratory)

Slides Cai-PEPX.pdf

8:40 AM Tevatron USR and other topics of USR

Speaker: Dr Michael Borland (Argonne National Laboratory)

Slides Borland-tauUSR.pdf

9:00 AM Overview of optics correction at Diamond and plan for DLS-II

Speaker: Riccardo Bartolini (Diamond and JAI)

Slides RB_USR_2012_10_31.ppt

9:20 AM Round beam experience at BINP

Speaker: Dr E. Levichev (INP)

Slides Levichev_Round_Beams.ppt

9:37 AM Discussion

10:15 AM → 10:30 AM Coffee break

10:30 AM → 12:00 PM Session 2: Accelerator Physics (part 2)

Convener: Qing Qin (Institute of High Energy Physics, CAS)

10:30 AM Optimization of dynamic aperture for the ESRF upgrade

Speaker: Mr Andrea Franchi (ESRF)

Slides USR2012_franchi_ESRF.pdf USR2012_franchi_ESRF.pptx

10:50 AM Coupling correction at SLS, minimum vertical emittance

Speaker: Prof. Leonid Rivkin (Paul Scherrer Institut)

Slides CouplingSLS_LRivkin.pdf

11:10 AM 2-frequency RF system for short bunches at SPring-8

Speaker: Mr takahiro fujita (SPring-8)

Slides Two-frequency_RF_system_for_short_bunch_at_SPring-8_II.pdf

11:25 AM Discussion

12:00 PM → 1:30 PM Lunch

1:30 PM → 2:30 PM Session 3: Injection (part 1)

Convener: Dr Zhentang Zhao (Shanghai Institute of Applied Physics,CAS)

1:30 PM Top – up injection

Speaker: Prof. Leonid Rivkin (Paul Scherrer Institut)

Slides TopupInjection_LRivkin.pdf

1:50 PM Injection into low-lifetime USRs

Speaker: Robert Hettel (SLAC NAL)

Slides injection_into_low_lifetime_USRs.pptx

2:10 PM Pulsed sextupole injection for MAX-IV

Speaker: Dr Simon Leemann (MAX IV Laboratory)

Slides Leemann_PSM_Injection.pdf

2:30 PM → 4:00 PM Session 4: Injection (part 2)

Convener: Robert Hettel (SLAC NAL)

2:30 PM Pulsed sextupole injection for BAPS

Speaker: Mr Yi Jiao (Institute of High Energy Physics, CAS)

Slides pulsed_sextupole_INJ_BAPS.pdf pulsed_sextupole_INJ_BAPS.pptx

2:50 PM Injection scheme for the SPring-8 upgrade

Speaker: Dr Kouichi Soutome (JASRI/SPring-8)

Slides USR2012_45_Soutome.pdf USR2012_45_Soutome.ppt

3:10 PM On-axis swap-out injection

Speaker: Dr Michael Borland (Argonne National Laboratory)

Slides Borland-SwapOut.pdf

3:30 PM Discussion

4:00 PM → 4:15 PM Coffee break

4:15 PM → 6:00 PM Session 5: Accelerator Engineering (part 2)

Convener: Huamin Qu (Institute of High Energy Physics, CAS)

4:15 PM MAX-IV vacuum chamber design

Speaker: Mrs Eshraq Al-Dmour (Vacuum group coordinator)

Slides USR_2012_The_vacuum_system_for_3_MAxIV.pptx

4:35 PM Single non-linear injection kicker magnet

Speaker: Mr Olaf Dressler (Helmholtz-Zentrum Berlin)

Slides Single Non-Linear Kicker Dressler

4:55 PM Fast pulsed power supply for ILC damping ring kicker

Speaker: Dr Jinhui Chen (Institute of High Energy Physics, CAS)

Slides USR-WORKSHOP-chenjh.pptx

5:15 PM Ground vibration for BAPS

Speaker: Mr Daheng Ji (Institute of High Energy Physics, CAS)

Slides USR2012-vibration.pdf

5:30 PM Discussion

6:30 PM → 8:00 PM Banquet

Thursday, November 1

8:00 AM → 9:35 AM Session 1: Instrumentation and Feedback

Convener: Prof. Jianshe Cao (Institute of High Energy Physics, CAS)

8:00 AM SOLEIL orbit feedback systems and photon BPMs

Speaker: Mr Jean-Claude DENARD (Synchrotron SOLEIL)

Slides Orbit_Feedback_Denard_Nov1_8h00.pptx

8:25 AM Multi-Bunch Feedback System in USR

Speaker: Mr takahiro fujita (SPring-8)

Slides BBF_for_USR.pdf

8:45 AM Feedback system for USRs

Speaker: Dr Christoph Steier (Lawrence Berkeley National Laboratory)

Slides csteier_usr2012_feedbacks.pptx

9:05 AM Discussion

9:35 AM → 12:30 PM Session 2: Insertion Devices

Convener: Mr Rodney Gerig (Argonne)

9:35 AM IDs for the ESRF upgrade

Speaker: Dr Joel CHAVANNE (European Synchrotron Radiation Facility)

Slides ESRF_IDs.pdf

9:55 AM Superconducting IDs at BINP

Speaker: Dr Konstantin Zolotarev

Slides Zolotarev_Superconductive_IDs_at_BINP.pptx

10:15 AM Coffee break

10:30 AM IDs for Shanghai Synchrotron Radiation Facility

Speaker: Dr Qiaogen Zhou (Shanghai Institute of Applied Physics, CAS)

Slides IDs-USR.ppt

10:50 AM PETRA-III damping wiggler experience

Speaker: Mr Alexander Kling (DESY Hamburg)

Slides A.Kling_PETRA3.pdf

11:10 AM Undulator technology for USR

Speaker: Mr Mark Jaski (Argonne National Laboratory)

Slides M.Jaski_ANL.pptx

11:30 AM Cryogenic permanent magnet and superconducting small period undulators

Speaker: Dr Johannes Bahrdt (Helmholtz-Zentrum Berlin)

Slides J.Bahrdt_BESSY.pptx

11:50 AM Discussion

12:30 PM → 1:30 PM Lunch

1:30 PM → 5:30 PM Closing Session

1:30 PM Report writing

2:25 PM Summary

Slides

• Accelerator_Engineering.docx
• Cao.ppt
• Closeout_Injection_rev3.pptx
• Closeout_Lattice_Design_rev3.pptx
• Gerig_ID_6_draft.pptx
• Lattice_Design.pptx
• Riamondi_Beijing_USR_Closeout_Acc_Physics.pptx

3:25 PM Closeout and Departure

3:30 PM Tour to HongLuo Temple