Conveners
R3-Front-end electronics and fast data transmission(3)
- christophe de La Taille (OMEGA)
- qiang wang (ihep)
Dr
Davide Pedretti
(University of Padova - INFN Laboratori Nazionali di Legnaro)
25/05/2017, 14:00
Front-end electronics and fast data transmission
oral
At the core of the Jiangmen Underground Neutrino Observatory (JUNO) front-end and readout electronics is the Global Control Unit (GCU), a custom and low power hardware platform with glue logic on board which is able to perform several different tasks spanning from selective readout and transmission as well as remote peripherals control. The hardware inaccessibility after installation, the...
Dr
Zhe Cao
(State Key Laboratory of Particle Detection and Electronics, University of Science and Technology of China)
25/05/2017, 14:18
Front-end electronics and fast data transmission
oral
The waveform digitization is more and more popular for readout electronics in the particle and nuclear physics experiment. A data acquisition module for waveform digitization is investigated in this paper. The module is designed on a 3U PXI (PCI eXtensions for Instrumentation) shelf, which can manage the measurement of two channels of waveform digitization for detector signals. It is equipped...
Dr
Pawel Marciniewski
(Uppsala University)
25/05/2017, 14:36
Front-end electronics and fast data transmission
oral
A compact size, 64-channel, 80 MSPS, 14-bit dynamic range ADC
modules for the scintillating electromagnetic calorimeter of PANDA were
developed and used for testing in various detector readout set-ups [1].
To minimize cabling bulk, the modules are planned to be placed inside of
the PANDA detector volume, where they will be exposed to magnetic field
of 2T and a non-negligible...
Mr
Hongbin Liu
(University of Science and Technology of China)
25/05/2017, 14:54
Front-end electronics and fast data transmission
oral
The ATLAS experiment is planning to build and install a new all-silicon Inner Tracker (ITk) for the High-Luminosity LHC (HL-LHC) upgrade. Extensive R&D on pixel sensors based on High-Voltage CMOS (HV-CMOS) process is ongoing. Given the potential advantages of this technology compared with the traditional planar pixel sensors, several prototypes with different pixel type have been designed and...
Dr
Giordano Raffaele
(University of Naples and INFN)
25/05/2017, 15:12
Trigger and data acquisition systems
oral
Static RAM-based Field Programmable Gate Arrays (SRAM-based FPGAs) [1, 2] are widely adopted in Trigger and Data Acquisition (TDAQ) systems of High-Energy Physics (HEP) experiments for implementing fast logic due to their re-configurability, large real-time processing capabilities and embedded high-speed serial IOs. However, these devices are sensitive to radiation effects such as single event...
